microRemote Handheld Wireless Focus Controller

microRemote Handheld Wireless Focus Controller

. The Redrock Micro microRemote Handheld Wireless Focus Controller allows for wireless focus control of the microRemote System for use on setups such as Steadicams Jib Arms and Gimbal Stabilizers. The microRemote handheld controller is a professional-level wireless device loaded with features that make focusing easier and more intuitive. Add the Handheld Controller to your microRemote system and achieve focus control in virtually any situation where it’s difficult to pull focus directly from the camera steadicam jib arms cranes or just to have some extra room around the camera. By controlling focus wirelessly you remove the need to directly touch the camera during a shot but still control focus to direct your viewer’s attention. By untethering your camera from a direct follow focus unique and creative shots can be achieved using a Steadicam or MoVi that would otherwise be impossible. In situations where wireless may not be possible or allowed the optional tethering cable wires the microRemote for direct interference-free operation up to 20ft away. The microRemote Handheld Controller also features the ability to trigger the Run/Stop of supported cameras (cable required). This allows for complete control of the camera remotely for when it may be completely inaccessible such as 100ft up on a crane. The microRemote Handheld Unit also has a built in Run/Stop light that indicates when the camera is recording or not so the camera does not even need to be within your line of sight. All lenses are mapped to the full 270˚ rotation of the microRemote. This is especially helpful for DSLR lenses that have very short throws but also very helpful for some Cinema Lenses that have unmanageably long throws. The expanded mapping on DSLR Lenses allows for more refined precise focus pulls that would be impossible with a traditional follow focus. The mapping process makes all lenses feel similar allowing for a consistent feel throughout your entire lens set. Features: Wireless Control of your microRemote system up to 1600m (1 mile) line of sight. Adjustable Indicator Arm Left/Right Hand Operation 3D Marking Discs Compatible with Flares for Use in Dark Environments Dual Adjustable Hardstops for precision pulls Powered by 2 AA Batteries that last up to 11 hours of continuous use Camera Run/Stop Triggering Reversible Direction Lanyard Loop for resting around neck 1/4'-20 thread for Building into a rig

Price: $995.00


LUMIX DMC-YAGH Interface Unit for GH4

LUMIX DMC-YAGH Interface Unit for GH4

. The Panasonic LUMIX DMC-YAGH Interface Unit for GH4 is offered exclusively for professional / industrial workflow enabling more powerful video transmission. It complies with Full HD (4:2:2 / 10 bit) four parallel output or 4K (4:2:2 / 10bit) output both with time code. The 2ch XLR input terminals are also equipped for line or condenser microphone. Microphone volume can be controlled L / R separately. It compies with 12V DC IN. Features: Professional 4K audio video interface unit for LUMIX GH4 XLR monaural 2ch terminals (Line / Mic. / Condenser Mic. Input) Audio level display monitor 3G-SDI video output terminal plus time code

Price: $997.99


Sola Nightsea GoPro Flip3 Filter

Sola Nightsea GoPro Flip3 Filter

. Use the Light and Motion Sola Nightsea GoPro Flip3 Filter with your GoPro camera to record Fluoro-diving footage! This Flip3 Camera Filter is only compatible with the GoPro Hero3 housing. Features: Easy to use flip mechanism for one finger on / off control Simple installation with rugged clamp-on design Unobstructed view of front LCD display Easy front camera button access with thick gloves Open the camera housing without removing filter No vignetting in any underwater shooting mode

Price: $99.00


DLC DSLR Rig Kit

DLC DSLR Rig Kit

. The new Dot Line Corp. DLC DSLR Rig Kit is complete and economical featuring a fully adjustable camera mount allowing viewing through the viewfinder or via the LCD screen with padded shoulder and chest supports as well a padded hand grip under the camera platform that is removable. The platform features a camera quick release plate allowing the photographer or videographer to quickly attach or remove the camera from the stabilizer. There is also a heavy duty adjustable strap providing extra security and allowing hands-free shooting. Complete with storage pouch.

Price: $129.94


microTie Cable Organizers 3 Pack

microTie Cable Organizers 3 Pack

. The Redrock Micro microTie Cable Organizers are an accessory for any rig that enables you to wrangle your cables reduce cable strain and accidental disconnects and add a touch of professionalism to your setup. Each microTie has inside and outside channels for inserting up to 3 different cables and securing to a 15mm rail. Any type of cable can be used with the microTie SDI HDMI audio lanc; almost any cable that goes on your rig can be better organized with microTies. Keeping your cables close to the rig reduces chances of snags or or accidental disconnects. In addition to cables the microTie's outside channel can be used to hold a grease pencil for your follow focus. Keep it tight and organized with Redrock microTies

Price: $24.50


MicroBalance Plus Upgrade kit

MicroBalance Plus Upgrade kit

. The Redrock Micro MicroBalance Plus Upgrade kit allows owners of the microBalance counterbalance weights to add Plus features including vertical mounting of weights left-right balance adjustment and ability to mount other accessories to the supplied cheese plate. Requires rod clamp from the microBalance counterbalance starter kit.

Price: $120.00


HDMI Right Angle Adapter

HDMI Right Angle Adapter

. Re-route and protect your HDMI cable and equipment from unnecessary strain with this standard (big) HDMI Right Angle Adapter . The fixed right angle position not only gives you more space between the EVF and camera but it gives you a sturdier connection and prevents your cable from becoming loose ensuring you have the best data signal transmission possible. This right angle HDMI adapter also converts any cable you are using to offer a 9.5mm - 10mm insertion the ideal insertion for use with the Zacuto EVF HDMI ports. Features: Fixed right angle position Avoids loosening of cable caused due to constant bending Suitable for use with the EVF HDMI ports Weight: 0.01 lb (4.5 g) Designed to re-route or eliminate strain on your HDMI cables when connected with devices such as the EVF Snap Male-to-female adapter can convert any standard HDMI cable to obtain a 9.5 to 10 mm connection

Price: $6.65


Habbycam Snap Digital SLR Video Cage

Habbycam Snap Digital SLR Video Cage

. Need a DSLR cage or 15mm rod supports but don't want to spend $400? The Dot Line Habbycam Universal Rod System and Cage is the answer. A full featured accessories cage with industry standard 15mm rods for mounting your follow focus matte box audio gear and other accessories. The included cheese plate with 1/4-20 threaded holes makes mounting just about anything a snap! The entire system is made of lightweight high strength composite materials and aircraft grade aluminum. The twelve inch long 15mm rods are ceramic coated which makes them almost impossible to scratch. This unique design is based on television / film industry standard specifications. The Habbycam Universal Rod System is compatible with all 15mm camera accessories on the market. The unique combination of design materials and function make Habbycam Snap products the lowest cost available in the market. Features: Accessories cage for DSLRs Industry-standard 15mm rod system Lightweight composite material/aluminum construction 1/4'-20 threaded holes

Price: $112.95


Side Handles

Side Handles

. The Side Handles are design specifically to fit the Shoulder Rig however they can be used really in any configuration you wish. This particular kit includes all the pieces that you would need to the handles to any industry standard set of rods. It will work perfectly with our DSLR Baseplate or Bottom Rods from a DSLR Cage. It features two Cushioned Handles for firm grip and also ships with a single 12' rods.

Price: $119.00


KN2269 Norbert Top Handle

KN2269 Norbert Top Handle

. The K-Tek KN2269 Norbert Top Handle is a foam-covered graphite handle that can be mounted on the top plate of any Norbert camera support frame for handheld operation.

Price: $39.90


Index

Jewelry Categories