. The Audio-Technica Camera Shoe Dual Mount for ATW-R1700 Digital Wireless Receiver makes it easy to mount two ATW-R1700 System 10 digital wireless receivers to a camera's hot shoe or to a tripod or other device with a Â¼' screw. Comes with 280 mm (11.0') AT8351 dual mono to stereo coiled cable (dual 3.5 mm mono mini-plugs to 3.5 mm stereo mini-plug) allowing you to use one receiver to capture left channel audio the other to capture right channel audio and feed both into the camera's audio input. The AT8350 3.5mm TRS (male) to XLR (male) audio cable (0.5 m 19.7″) with balanced output allows the System 10 output to be plugged into professional balanced XLR inputs. The System 10 Camera-Mount Digital Wireless System is a digital wireless system designed to provide rock-solid performance along with easy setup and clear natural sound quality. Featuring a compact design the system is available in handheld lavalier and body-pack configurations. Operating in the 2.4 GHz range far from TV and DTV interference this system offers extremely easy operation and instantaneous channel selection. Up to eight channels may be used together without any frequency coordination problems or group selection issues. System 10 wireless systems ensure clear communications by providing three levels of diversity assurance: frequency time and space. Frequency Diversity sends the signal on two dynamically allocated frequencies for interference-free communication. Time Diversity sends the signal in multiple time slots to maximize immunity to multipath interference. Finally Space Diversity uses two antennas on each transmitter and receiver to maximize signal integrity. Features: Digital 24-bit/48 kHz wireless operation for ultimate sound quality Dependable performance Automatic frequency selection for seamless interference-free operation Three levels of diversity assurance: frequency time & space 3.5 mm (1/8') output jack with switch to select between TRS balanced and unbalanced (dual mono) Features convenient rechargeable internal battery Receiver and transmitter battery level displays Removable antennas Camera shoe mount 1/8' headphone jack with volume control
. The Rode Microphones Boompole Pro Ultra-Lightweight Modular Boom Pole (7') is a unique modular booming device that allows location sound engineers to capture audio in confined or difficult spaces.
Optimised for use with the VideoMicro microphone the Micro Boompole Pro’s three sections combine to a maximum length of 2.2m (7’2”). Using an industry standard 3/8” thread these sections can also be used to extend the Boompole Pro to reach to over 3.7m (12'). Features: 100% carbon fiber construction Ultra lightweight - only 125gm (4.5oz) fully extended Unique modular design - three sections can be connected as required to provide up to 2.2m (7’) reach
The . Sennheiser Bodypack Wire Belt Clip is a replacement for the Sennheiser Bodypack Receiver and Transmitter. The clip is made of high quality material and gives firm grip to hold the body pack.
. The ideal entry-level wireless microphone system for small venues BLX offer professional quality sound with simple setup and an intuitive interface. The Shure BLX1288/CVL Dual-Channel Combo Wireless Systems combine professional-quality sound with simple setup and an intuitive interface for legendary audio performance right out of the box. Precision-built and available in a variety of configurations it’s the most accessible way to own the stage. Includes BLX88 dual-channel receiver BLX1 bodypack transmitter BLX2/PG58 handheld transmitter CVL lavalier microphone power supply microphone clip lavalier clip lavalier windscreens and user guide. Transmitter form factors include handheld bodypack headworn lavalier instrument clip-on and combo. Single-channel dual-channel and rack mount receiver options available. Powered with AA batteries. Offers a 24 MHz tuning bandwidth and up to 12 compatible systems per frequency band (region dependent) Features: Bodypack Transmitter - Up to 14 hours of continuous use with 2 AA batteries. 300 ft (100 m) transmission radius. Dual Channel Receiver - Dual channel receiver with microprocessor-controlled internal antenna diversity. Lavalier Condenser Microphone - Clip-on lavalier condenser microphone in a discreet miniature form factor ideal for professional presentations. Works with Shure wireless systems. Handheld Wireless Microphone Transmitter - Featuring an integrated PG58 microphone cartridge the BLX2/PG58 Handheld Wireless Microphone Transmitter delivers wireless audio with professional clarity and reliability. Up to 12 compatible systems per frequency band (region dependent) One-touch QuickScan frequency selection quickly locates the best open frequency in case of interference Up to 14 hours of continuous use from 2 AA batteries (included) Up to 300 ft (91 m) operating range for total wireless freedom XLR and ¼' output connectors Rugged and reliable Shure construction Legendary Shure microphones options featuring integrated microphone capsule design
. For outside broadcasting - a combined foam windshield and hairy cover that reduces wind noise most effectively. The Sennheiser MZH 600 Windshield is an accessory for the MKE 600 shotgun mic. The MZH 600 Windshield features a combination of foam and faux fur that diffuses wind noise during outdoor use. Features: Compatibility: Sennheiser MKE 600 shotgun mic
. The Calrad Lavalier Clasp-type Microphone Holder is a Tie Clip microphone holder that fits 7/32 inches diameter microphones. Lavalier Clasp-type Microphone Holders are used for hand free performance.
. Azden's most popular DSLR audio products are now compatible with Smartphones and Tablets! The Azden WMS-PRO+I VHF Wireless Lavalier and Handheld Mic System includes a new interface cable making it compatible with any mobile device with a TRRS jack. Record great wireless audio into your iPhoneÂ® 3/4/5 iPadÂ® (3rd generation and newer) Samsung Galaxy SÂ® 3/4/5 Galaxy TabÂ® 3 and most Android? devices. The WMS-PRO+i is an easy to use and affordable wireless audio system combining the WM-PRO body-pack transmitter and WR-PRO camera mount receiver. Both a lavalier microphone and a handheld microphone are included for added flexibility. The WL/T-PRO combines the WM-PRO body-pack transmitter with the EX-503 electret condenser omni-directional lavalier microphone. This is the standard 2 frequency switchable (169.445MHz and 170.245MHz) body-pack transmitter for all 'PRO' series receivers. Uses a single 9V alkaline battery and comes with a belt-clip. The EX-413 handheld plug-in microphone is also included and can be substituted for the lavalier mic when the user prefers. The WR-PRO is a single channel receiver but has two selectable operating frequencies to choose from (169.445MHz and 170.245MHz) giving the user an option in case one channel has interference. Comes with camera shoe mount and a hard wired 3.5mm mono microphone output cable. Features: Smartphone and tablet compatible! Single Channel VHF wireless system WL/T-PRO body-pack transmitter & lapel mic EX-413 handheld mic for added flexibility WR-PRO Camera Mount Receiver 2 selectable operating frequencies Operates in the low-interference VHF band Transmit audio up to 300 feet away
. The Sennheiser MZW-601 Blimp Windscreen for Sennheiser MKH60/416 with K6 Power Module is a lightweight rugged protective basket windshield which provides excellent suppression of wind noise when used for outdoor applications. Its length is approx. 44 cm.
. The MyMyk Windshield for SmartMyk Microphone is a slip-on open-cell reticulated foam with an integral fur cover that provides excellent wind protection whilst safeguarding your SmartMyk in the most difficult of conditions. SmartMyk Windshield successfully reduces wind noise by up to 20dB without any adverse effect on High-Frequency. Advanced materials adhesives and assembly techniques all combine to create an extremely durable product that you can take anywhere. Manufactured in the United Kingdom for MyMyk by Rycote. The SmartMyk Windshield does not detract from the HD (Highly Defined) quality audio recorded by MyMyk; transparent clear recorded sound which is an authentic replication of the original source. The result is stunning sound that you never before thought possible perfectly complementing the HD video of your production. Note: Camera and lens not included! The windshield is designed to reduce the effects of wind attacks by 20dB. It combats the problem of wind gusting a serious concern when recording in an open-air environment. The fur covering is manufactured from advanced materials designed to withstand extreme UV exposure ensuring the windshield retains its fine and flexible qualities. The internal core of the windshield is constructed of reticulated acoustic foam to ensure the sounds recorded are not impeded or attenuated and as a result offers very good wind-noise reduction without any adverse effect on High-Frequency. Both the acoustic foam and synthetic fur are made from materials which are specially designed to withstand moisture damage. Special synthetic adhesives and assembly techniques all combine to make the Smartmyk Windshield an extremely tough product that provides excellent wind and weather protection in the harshest of environments. Features: Slips On and Attaches Easily Open Cell Design Reticulated Foam Fur Cover Reduces Wind Noise by up to 20 db
. The Rode Microphones DeadCat GO Artificial Fur Wind Shield for the VideoMic GO is a furry wind cover for the VideoMic GO. It is specifically designed for use indoors to protect from air conditioner drafts and outdoors to protect from wind noise. Its artificial fur reduces wind noise while remaining acoustically transparent. Features: Designed for minimizing any wind noise Ideal for outdoor audio and video applications Made from artificial fur (no cats were harmed) Acoustically transparent for quality recordings